Provided below are three drivers for the USB cradle. Please be sure to read the instructions and get the correct driver for your cradle.

To determine if you have an ISD, ScanLogic or USB 2.0-SMSC cradle, follow these steps:

1. Eject the DMS from the computer
2. Remove the DMS from the cradle
3. Look at the label on the bottom of the USB cradle
   -If the label contains: "DMS-USB1 rA" or "KHD-USB1" it's an ISD
   -If the label contains: "DMS-500-USB1" or there is no label, it's a ScanLogic
   -If the label contains "DMS USB2 rev -", it's a USB 2.0 - SMSC

ISD Driver Installation Instructions:

Note: For ISD drivers install the drivers on ALL operating systems
1. Unplug the DMS from the USB cradle
2. Run the appropriate ISD driver installation program (Click to download)
3. Reboot the computer
4. Plug in the DMS

ScanLogic Driver Installation Instructions:

Note: For ScanLogic drivers only install the drivers on Windows 98 and Windows ME, otherwise do not install these drivers. Drivers are included with all non-Windows 98 and Windows ME operating systems.
1. Unplug the DMS from the USB cradle
2. Run the ScanLogic installation program (Click to download)
3. Reboot the computer
4. Plug in the DMS

USB 2.0 - SMSC installation instructions:
Note: For USB 2.0 - SMSC Drivers only install on Windows 98, otherwise do not install these drivers. Drivers are included with all non-Windows 98 operating systems.
1. Unplug the DMS from the USB cradle
2. Run the USB 2.0 - SMSC installation program (Click to download)
3. Reboot the computer
4. Plug in the DMS